Tel.: +49 (0)6145/503-0
Contact

Our references

We serve our customers in the rarest cases with products "off the shelf". The application- and customer-specific adaptation of our products is one of our strengths.

Here you can see a small selection of our references, which has produced AViTEQ and AEG Vibrationstechnik GmbH over the years for customers individually. By filtering functions "Product group", "Industrial process", "Drive" and "Industry" you can restrict the selection according to your wishes.

350000
Realised projects

37000
System drawings

 
No results. Please reduce your filter selection.
1
more

Screening of fine material in recycled wood

Product group: Linear vibrating screen
Industrial process: screening, classifying, dewatering
Industry: Recycling, Environment, Glass
Type of drive: Unbalance motor
capacity (t/h): 1,5 | bulk: Biomasseschnitzel | density (t/m³): 0,15 | grain size (mm): 0 - 50 (120)
function:

Within a wood recycling process the fines should be filtered out of shredded wood. The particle sizes are at 20% <5 mm and 80%> 5 mm. The necessary separation size is 5 mm. The wood has a moisture content of 8-12%. Feeding from a screw conveyor vertically downwards. The screen is to be installed outdoors.

solution:

AViTEQ sold a linear vibrating screen (VSB700 / 4000 UVG30W) with unbalanced motors. The screen has a length of 4,000 mm and a width of 700 mm. In order to distribute the material clean over the entire width, distribution panels were used in the inlet section. Rubber inspection covers were integrated in order to perform a quick check of the condition of the screen lining.

usability:

- High screening quality through special screen linings

- Durable and selected for outdoor use unbalanced vibrators

place of installation: Switzerland
2
more

Dosing and weighing of screws and nuts

Product group: Trough conveyor
Industrial process: weighing
Industry: Steel Production, Foundry Technology
Type of drive: magnetic vibrator
capacity (t/h): 7,2 | bulk: Screws and nuts | density (t/m³): 1,5 - 5 | grain size (mm): M8
function:

The challenge from the customers: Discharging of 2 tones of screws and nuts in portions. A portion (batch) weighs 270 kg. The material may not be damaged during the transport and fine dust particles should be screened. The screws are dosed at the end in a box.

solution:

An AViTEQ vibrating trough conveyor (OA3000 / 1400 700ASG-MVG33-1P) provided with magnetic vibrator and frame has four load cells. The trough has a length of 3000 mm and 1400 mm width. The weighing terminal measures the actual weight of the material (nuts and screws) in the trough. If the material is transported by the vibrations to the end of the chute, the loss of weight is measured. The actual weight of the material is passed through the analog output in the SPSS. At a loss of 270 kg, the vibrating conveyor stops. On the frame a local service module was attached to the switch "Auto / local". There are two variants have been implemented to control: external control (automatic mode) and local control (local operation).

usability:

- Finest dosing by the magnetic vibrator

- Gentle product transport by vibration technology

- Weighing accuracy of + -1%

place of installation: Germany
3
more

Trough conveyor for separating light materials

Product group: Trough conveyor
Industrial process: Discharging, feeding, conveying
Industry: Recycling, Environment, Glass
Type of drive: Unbalance motor
capacity (t/h): 30 | bulk: shards | density (t/m³): 1 | grain size (mm): 3 - 150
function:

Inside a glass recycling plant, fine snippets to be sorted out from shards. The bulk material (shards are very abrasive.

solution:

AViTEQ provided a vibrating trough conveyor in a specially adapted design (OA 4000/2000 ASS UVN95W). The conveyor trough is 4000 mm long and 2000 mm wide. The material is loaded in the center of the upper section and is distributed inside the two outlets. At the same time air is introduced into the chute to blow light material (paper) upwards. The lightweight material leaves the chute, then through the two upper outlets. The vibrating conveyor is designed in the interior that the material is circulated. Characterized the light material is more easily detected by the air flow. Against the abrasive shards the vibrating chute has integrated with a wear-resistant lining (EIPA 480).

usability:

- Robust and durable design

- Easily removable covers

place of installation: USA
4
more

Fine screening in a processing plant for waste

Product group: Linear vibrating screen
Industrial process: screening, classifying, dewatering
Industry: Recycling, Environment, Glass
Type of drive: Unbalance motor
capacity (t/h): 12 | bulk: slag (dry) | density (t/m³): 0,8 - 1,2 | grain size (mm): 30 - 80 mm
function:

Within a waste processing plant, the dry discharged slag is to be prepared so that the elements can be re-sold. To relieve a crusher, the fines should be screened out. Within the individual treatment elements there is an additional negative pressure. The bulk material tends to clog in the screen decks (clogged particles).

solution:

AViTEQ chose a fine liear motion screen with unbalance motors (VSB600 / 2800ASG-UVF24X) with a length of 2800mm and width of 600 mm to solve the task. To ensure the tightness, a dust cover made of aluminum and quick releases was used. The quick releases also help to make a quick change of the screening decks. Against the formation of clogged particles a specially developed screening deck was used.

usability:

- Quick change of the screen lining

- Dust proofing

- Less clogged particles

place of installation: Switzerland
5
more

Hopper discharge unit for a harbor crane on the sea

Product group: Hopper discharge unit
Industrial process: Discharging, feeding, conveying
Industry: Construction, Quarries, Pits, Mining, Cement
Type of drive: Unbalance motor
capacity (t/h): 1250 | bulk: sulphur, phosphate rock, urea, sand, coal | density (t/m³): 0,74 - 1,6 | grain size (mm): 0 - 75
function:

For a harbor crane a bin discharge unit was needed. The device should have the ATEX explosion protection (ATEX Zone 20 inside, ATEX Zone 21 outside). It was also important that the bin discharge unit is designed to minimize vibrations into the crane and withstands of salty air.

solution:

AViTEQ offered an ATEX certified bin discharge unit with a length of 3000 mm and width of 1600 mm (EX OA3000 / 1600ASF-eUVN95W). In order to avoid vibrations in the crane special ROSTA elements were used. Against the salty air special drives and a special paint were taken for the steel structure.

usability:

High capacity in a small space.

place of installation: Turkey
6
more

Lightweight dewatering screen for porous stones

Product group: Dewatering screens
Industrial process: screening, classifying, dewatering
Industry: Construction, Quarries, Pits, Mining, Cement
Type of drive: Unbalance motor
capacity (t/h): 5 | bulk: Gravel | density (t/m³): 1,3 | grain size (mm): 8-32
function:

AViTEQ had to supply a dewatering screen for porous materials. The troughout of about 5 t/h of solids and up to 320 m³/h of water was to be realized. The dewatering screen should be built for outdoor installation (Switzerland, 500m above sea level). The screen panels had to be changed quickly.

solution:

AViTEQ dewatering screen (VSW600/1600) with a length of 1600mm and a width of 600mm. The screen was fitted with special screening panels and it was constructively provided a lightweight construction.

usability:

Advantages of lightweight construction:

- Lighter construction (smaller drives)

- Faster delivery time

Advantages of AViTEQ screen panels:

- durable

- Quick and easy replacement of the screen panels

place of installation: Switzerland
7
more

Trough conveyor for hot forging scrap

Product group: Trough conveyor
Industrial process: Discharging, feeding, conveying
Industry: Steel Production, Foundry Technology
Type of drive: Unbalance motor
capacity (t/h): 1 Stck. / 6 Sek. | bulk: Forging scrap | density (t/m³): 1 | grain size (mm): 350x50x50
function:

Transport of hot forging scrap from a press with 2 discharges up to a box. The forging scrap (hinges for truck door) have a temperature of 1,200 ° C. The weight per piece is 1.5 kg with dimensions of 350x50x50 mm. Troughput: 1 Hinges / 6 seconds

 

Video

solution:

AViTEQ vibrating conveyor with double channel trough. (UPN 280 / S235JRC ) (OA 3000/750-UVF11W)

usability:

Replacement of 2 chain belts, which needs a very high maintenance. AViTEQ trough conveyor does not require replacement of the gutter trough. Very low maintenance, thereby reducing downtime. Trough and drive console are screwed together with expansion sleeves.

place of installation: France
8
more

Trough conveyors with screening area for scrap metal

Product group: Trough conveyor
Industrial process: Discharging, feeding, conveying
Industry: Recycling, Environment, Glass
Type of drive: Unbalance motor
capacity (t/h): 1 Stück / 5 sek. | bulk: Scrap metal | density (t/m³): 1 Stück | grain size (mm): 500x500x300
function:

Metallic scrap falling from a scrap cutter through a sloping chute to the ground. From there, the scrap parts has to be transported 5 meters away and additionally small scrap parts and earth are screened. The pieces of scrap are having a weight of 500 kg and 1 piece every 5 seconds are conveyed.

Video

solution:

AViTEQ trough conveyors with grate screening area.

usability:

Many recycling companies integrate this trough conveyor with screening area in their facilities. Advantages for this product compared with a conveyor belt is that the distance will be transported without great wearing and additional screening on the way.

place of installation: France
9
more

Grizzly screen for limestone

Product group: Linear vibrating screen
Industrial process: screening, classifying, dewatering
Industry: Construction, Quarries, Pits, Mining, Cement
Type of drive: Unbalance exciter
capacity (t/h): 800 | bulk: limestone | density (t/m³): 1,44 | grain size (mm): 1000
function:

Primary system:

  • AViTEQ hopper discharge
  • loading a crusher 1400 mm wide
  • screening separation about 40 mm.
solution:

Grizzly screen type VSR 1300/7500-ASS VU78000 / 8-S08:

 

- huck bold construction

- Entry zone screwed onto section beams 4000 mm long

- 4 deck bar grates arranged in a cascade and with staggered rows (gap width: 35/45 mm)

- Drive: unbalance exciter Fc = 450 kN directly with cardan shaft to a drive motor 45 kW - 1000 U / min driven

usability:

The AViTEQ grizzly screen has to feedthe crusher with a throughput up to 800 t / h. And the grizzly screen has to relieve the crusher of fine material.

place of installation: Algeria
10
more

Part of a Recycling Waste Processing plant

Product group: Trough conveyor
Industrial process: screening, classifying, dewatering
Industry: Recycling, Environment, Glass
Type of drive: Unbalance motor
capacity (t/h): 1 | bulk: Müllschlacke | density (t/m³): unterschiedlich | grain size (mm): 0-2
function:

Discharge of 300-400°C of hot waste after incinerator and transport to vibrating screen.

solution:

2-way-chute in the inlet area of unbalanced driven AViTEQ conveyor for emergency case, camera controlled transport to a AViTEQ screen (to screen out >2mm waste), transport of the oversize waste through 20m AViTEQ long distance conveyor type OL with exciter drive, big parts of waste can be removed by means of moveable cover section, execution allows explosion due to special covered explosion opening.

usability:

Because of dry waste process instead of wet handling is more simple.

place of installation: Switzerland
11
more

Reversible conveyor for hot foundry sand

Product group: Reversible trough/tubular conveyor
Industrial process: Discharging, feeding, conveying
Industry: Steel Production, Foundry Technology
Type of drive: Unbalance motor
capacity (t/h): 30 | bulk: foundry sand | density (t/m³): 1,2 | grain size (mm): 1
function:

Transport of foundry sand into 2 directions, capacity 30 t/h, sand temperature 200°C.

solution:

Reversible conveyor type OAR 5196/600 ASS-U-motors. Trough c/w extensible liner inserts because of temperature. Special design of trough with inclined both sides. Driven by 3 unbalanced motors.

usability:

- reduced installation height due to reversible operation of the conveyor

- high life cycle.

place of installation: Germany
12
more

Filling of salad cups with spices

Product group: Small conveyor
Industrial process: Discharging, feeding, conveying
Industry: Food, Animal Feed
Type of drive: small conveyor drive
Befüllung von Salatbechern mit Gewürzen
capacity (t/h): 0,1 | bulk: Spices | density (t/m³): 1 | grain size (mm): 1
function:

Flling of 4 salad cups which are placed in a rotating plate. Product is chives, dill, red pepper granule and chili pepper.

solution:

Small conveyor (KF6 – CR/98S/202) with trough which is divided into 4 tracks by means of continued welded strips. Outlet nozzles c/w fasteners for cups. Drive with chemical nickel-plated surface.

usability:

- typical advantages of magnetic drive

- easy to clean

- equal spread of the products

- 1 unit instead of 4

place of installation: Netherlands
13
more

Tube feeder for milk powder

Product group: Tubular feeder
Industrial process: Discharging, feeding, conveying
Industry: Food, Animal Feed
Type of drive: magnetic vibrator
capacity (t/h): 0,1 | bulk: milk powder | density (t/m³): 0,25 | grain size (mm): unter 1
function:

discharge of milk powder after bunker with bucket wheel and dosing with high capacitiy of 40 m3/h (grain size – 1mm, 0,25 t/m³ bulk density).

solution:

Tube feeder with a length of 4630mm and a width of 406mm, driven by a magnetic vibrator with a frequency of 33Hz (MVH33). With surface roughness of 0,2-0,3 μm, continues welding, keel hermetic closed and welded to the tube, special tube covers.

usability:

- Staubdichtes System

- Vorteile der MV-Technik

- Einfache Reinigung durch Spezialdeckel

place of installation: Netherlands
14
more

Dosing PUR-waste to a mill

Product group: Small conveyor
Industrial process: Discharging, feeding, conveying
Industry: Recycling, Environment, Glass
Type of drive: small conveyor drive
capacity (t/h): 1 | bulk: PUR-waste | density (t/m³): 0,6 | grain size (mm): 0-10
function:

Dosing of 1 t/h PUR-waste (grain size 0-10 mm, bulk density 0,6 kg/dm3) to a mill.

solution:

eKF12/1180/300-T dust tight closed trough made from stainless steel c/w storage hopper.

usability:

takes care of environment operation

explosion proof execution according to zone 21 of ATEX

place of installation: Germany
15
more

Storage and conveying device for catalyst parts

Product group: Trough conveyor
Industrial process: sorting, dosing, storaging
Industry: Chemicals, Plastics, Pharmaceuticals
Type of drive: Unbalance motor
capacity (t/h): 0,450 | bulk: Catalyst parts | density (t/m³): Stück | grain size (mm): 10
function:

450 kg / h catalyst parts comes from a closed pipe system connected with compensators. The vibrating trough conveyor in an enclosed design served as a buffer.

solution:

Vibrating Conveyor trough in dustproof special design according image. Execution of stainless steel with flange.

usability:

Storage and conveying in one device. Space and cost saving.

place of installation: Germany
16
more

Hopper discharge unit in a steel plant for alloyes

Product group: Hopper discharge unit
Industrial process: Discharging, feeding, conveying
Industry: Steel Production, Foundry Technology
Type of drive: magnetic vibrator
capacity (t/h): 100 | bulk: ferro alloyes | density (t/m³): 2 | grain size (mm): 5 - 60
function:

Hopper discharge of ferro alloyes in a steelmill with environmental temperature between –50°C up to +150°C.

solution:

OA 1320/420ASS MVE50-4 trough feeder and AB 400/400/1000 ASS discharge chute feeder driven by one off magnetic vibrator in tropical finish c/w special connection cable made of silicon. Trough made from special steel no. 1.0566 because of temperature –50° C.

usability:

Well known advantages of magnetic vibrator suitable for extreme environment.

place of installation: Russia
17
more

Trough feeder for forge parts

Product group: Trough conveyor
Industrial process: Discharging, feeding, conveying
Industry: Steel Production, Foundry Technology
Type of drive: magnetic vibrator
capacity (t/h): 1 Stck. / 5 sek. | bulk: Forge parts | density (t/m³): Stück/piece | grain size (mm): bis 500
function:

Transport of forge parts from a big bowl feeder to heating oven. Forge parts 22-80mm diameter, length 70-500mm.

solution:

Trough feeder type OA1450/198-DY with steel liner and damping sandwich against noise, trough with v-shape for single transport mode.

usability:

Controlled feed into the oven for even and effective heating procedure. Well known advantages of magnetic drive.

place of installation: worldwide
18
more

heat exchange process machine for vanadium / nickelash

Product group: Vibrating fluid-bed system
Industrial process: cooling, heating, drying
Industry: Steel Production, Foundry Technology
Type of drive: Unbalance motor
capacity (t/h): 2 | bulk: Vanadium / nickelash | density (t/m³): 0,6 | grain size (mm): 0,02
function:

Indirect cooling of 2 t/h (≅ 2 m³/h) of vanadium and nickelash. Product comes from discharge tube of the oven and should be cooled down fromb 220°C to 80°C.

solution:

AViTEQ cooling conveyor type OAW-1000-UVG 21W. Dust tight execution, trough with screening area at the outlet position for screening out of oversize product (only some parts), trough c/w cover and quick acting clamping system and inspection openings. Driven by 2 off motors with steep acting line. To achieve longer residential time of the product for cooling, trough with 3 independent cooling inserts laser welded, trough made from stainless steel.

usability:

- high causing efficiency due to compact design

- easy handling because of independent inserts

- high resistance against leakage because of the laser welding

place of installation: Austria
19
more

Dewatering screen for kaolin

Product group: Dewatering screens
Industrial process: screening, classifying, dewatering
Industry: Construction, Quarries, Pits, Mining, Cement
Type of drive: Unbalance motor
capacity (t/h): 8 | bulk: Kaolin | density (t/m³): 0,5 | grain size (mm): 0,05
function:

wet screening of 8 t/h kaolin (100% - 50 micron) c/w 30 m3/h water. Cutpoint is 0,2 mm.

solution:

AViTEQ screen type VSW 1200/2500 – UVG38X with stationary installed shower nozzles. Screen body c/w inserts as wedge wire type with 0,2 mm slot width.

usability:

- Smaller screen area compared with the existing stationary

- screen decks higher screen efficiency

- lower process costs

place of installation: Southern France
20
more

Trough conveyor for woodrecycling

Product group: Trough conveyor
Industrial process: Discharging, feeding, conveying
Industry: Recycling, Environment, Glass
Type of drive: Unbalance motor
capacity (t/h): 50 | bulk: mixed wood | density (t/m³): 0,2 | grain size (mm): 0-350
function:

Transport of 50 t/h mixed wood installed in recycling plant, grain size up to 350 mm, including possibility by means of perforated plate for screening.

solution:

AViTEQ Trough conveyor with length of 3500mm and 2500mm and a width of 1400mm. Spezial lining an two unbalanced motors (UVH-46W). Trough is 500 mm high and supported on compression springs.

usability:

almost maintenance free operation designed for heavy duty and reliable operation.

place of installation: Germany
21
more

Fluid bed dryer for PET-Flakes

Product group: Vibrating fluid-bed system
Industrial process: cooling, heating, drying
Industry: Recycling, Environment, Glass
Type of drive: Unbalance motor
capacity (t/h): 5 | bulk: PET-Flakes | density (t/m³): 0,3 | grain size (mm): 30
function:

Drying of 5 t/h plastic waste (PET-flakes, 30x30 mm grain size, 0,3 t/m3 bulk density from 14% moisture to 5% rest moisture).

solution:

VF 1250/4950 – UVH46W c/w feeder type OA 1600/800 – UVF11W including steel structure. Fluidbed type VF with perforated plate (conidur). Process requires 9000 m³/h hot air with 120°C temperature.

usability:

Increased efficiency due to direct heating process and therefore lower process costs.

place of installation: France
22
more

Trough feeder (Heavy duty version) for potash salt

Product group: Hopper discharge unit
Industrial process: Discharging, feeding, conveying
Industry: Construction, Quarries, Pits, Mining, Cement
Type of drive: magnetic vibrator
capacity (t/h): 1200 | bulk: Potash salt | density (t/m³): 1,25 | grain size (mm): 0-300
function:

Hopper discharge of 1200 t/h potash salt (1,25 t/m³ bulk density, 0-10 mm grain size) from underground to belt conveyor.

solution:

Hopper discharge unit typ OAT with a length of 3000mm and a width of 2000. Heavy duty feeder driven by 2 magnetic vibrators 33 Hz type (MVH33-1). Sectional trough divided in two pieces.

usability:

- high availability

- advantages of magnetic drives

- emergency operation in case of shut down of one of the

- drives possible (up to 70% capacity)

- due to sectional trough easy to handle in underground

place of installation: Germany - underground section
23
more

Hopper Vibrator for coal trains

Product group: Bin activator
Industrial process: compacting, loosening
Industry: Construction, Quarries, Pits, Mining, Cement
Type of drive: magnetic vibrator
capacity (t/h): - | bulk: Coal | density (t/m³): 0,64 | grain size (mm): 50
function:

Magnetic vibrator type MVE50-4 c/w mechanical system for contact with waggon. Vibration discharge aid for unloading of coal waggon.

solution:

The vibrator will be pressed by means of mechanical system to the waggon. Under vibration the waggon will be unloaded and cleaned from rest of coal.

usability:

Improved unloading of waggon and therefore optimised discharge process.

place of installation: Russland
24
more

Compacting of nuclear waste

Product group: Bin activator
Industrial process: compacting, loosening
Industry: Recycling, Environment, Glass
Type of drive: Unbalance motor
capacity (t/h): - | bulk: Nuclear waste | density (t/m³): - | grain size (mm): -
function:

Contaminated nuclear waste has to be fixed in concrete. The concrete should be massive without holes or bubbles.

solution:

Container will be shaken during filling by means of unbalanced motor inside the soft concrete. Afterwards the motor has to be handled and stored together with the concrete according the laws.

usability:

Due to the compacting process the quality of concrete achieves the required technical figures of the law.

place of installation: Germany
25
more

Trough conveyor for limestone

Product group: Trough conveyor
Industrial process: Discharging, feeding, conveying
Industry: Construction, Quarries, Pits, Mining, Cement
Type of drive: Unbalance motor
capacity (t/h): 25 | bulk: limestone | density (t/m³): 0,8 | grain size (mm): 0-100
function:

Transport of 25 t/h limestone (0,8 t/m3 bulk density, grain size 0-100 mm) from dosing feeder. Alternative discharge to mixing plant.

solution:

trough conveyor with a length of 4000 and a width of 650. Driven by 2 motors from above, pneumatic activated gate in the area of inlet.

usability:

Safe of space due to the possible two off discharge possibilities.

place of installation: Egypt (sugar plant)
26
more

Screening of cement

Product group: Parts conveyor
Industrial process: screening, classifying, dewatering
Industry: Construction, Quarries, Pits, Mining, Cement
Type of drive: parts conveyor drive
capacity (t/h): - | bulk: Cement | density (t/m³): - | grain size (mm): -
function:

Screening of cement with splitting at (width) 40μ with a output of 60kgs/h. For easy cleaning, the screen moduls can be taken out to the side.

solution:

Screen on basis of a part conveyor feeder in modular design. Enables a fast change of the screen moduls. To avoid block of the screen, a cleaning system by means of rubber balls has been installed directly below the screen. To avoid caking of the smaller particles below the screen, a filter has been installed as the bottom plate. Using compressed air, the particles can be removed and will be brought out of the machine. (VSRD-400-1/TFH400-L-S50 (#50645))

usability:

- Compact and versatile screening machine for fast change of the screen moduls.

- Target product: fine bulk material

- Used at: Quality control production

place of installation: Germany
27
more

Feeder for rawsalt

Product group: Trough conveyor
Industrial process: Discharging, feeding, conveying
Industry: Food, Animal Feed
Type of drive: magnetic vibrator
capacity (t/h): 600 | bulk: Rawsalt | density (t/m³): 1,4 | grain size (mm): 0-150
function:

Discharge of 600 t/h rawsalt and feed to beltconveyor (grain size 0-150mm, single grain up to 300mm, bulk density 1,4 t/m³). Process target is massflow of salt in the existing bunker.

solution:

OA2670/1600ASS-MVH33 c/w bunker discharge chute, gate to adjust the layer hight, dustsealing system Trellebourg, controlled massflow in connection with vibrated bunker discharge chute.

usability:

Guaranteed massflow in the bunker, optimal dosing through magnetic drive.

place of installation: Germany underground (-890m)
28
more

Conveyor designed for cooling of carborundum

Product group: Vibrating fluid-bed system
Industrial process: cooling, heating, drying
Industry: Chemicals, Plastics, Pharmaceuticals
Type of drive: Unbalance motor
capacity (t/h): 1,5 | bulk: carborundum | density (t/m³): 1,7 | grain size (mm): 1,2
function:

A capacity of 1500 kg/h carborundum with 200°C temperature has to be cooled down to 50°C (+- 30°C).

solution:

Operation of 2 conveyors type OAOW 3580/900 driven by 2 unbalanced motors type UVH38W, conveyor body made from stainless steel, dust tight execution including inspection openings, indirect water cooling (5,5 m³/h water each conveyor) by means of laser welded cooling inserts

usability:

High efficiency and reduced required installation space due to compact design. Reliable system because of laser welding

place of installation: Austria
29
more

Hopper discharging of medical tablets

Product group: Small conveyor
Industrial process: Discharging, feeding, conveying
Industry: Chemicals, Plastics, Pharmaceuticals
Type of drive: small conveyor drive
capacity (t/h): 2 | bulk: Tabletts | density (t/m³): 0,79 | grain size (mm): 10
function:

Bunker discharge of 2000 kg/h easy conveyable product (medical tablets) bulk density 0,79 kg/dm3.

solution:

Trough made from stainless steel c/w round shaped inlet nozzle. Trough c/w oval shaped outlet nozzle. Trough covered with opening (glass covered) for cleaning including quick acting clamping system. Max. possible capacity 30m3/h. (KF Typ KF24/1000/460)

usability:

- low installation height required even with biggertrough dimension

- Advantages of dosing with magnetic drive.

place of installation: Switzerland
30
more

Spreading of toppings on cookies

Product group: Small conveyor
Industrial process: spreading
Industry: Food, Animal Feed
Type of drive: small conveyor drive
capacity (t/h): 0,15 | bulk: Stück / piece | density (t/m³): 1 | grain size (mm): 5
function:

Spreading of hazelnuts and raisins as well as crushed sweets and smarties onto biscuits over 1000 mm width.

solution:

small conveyor (KF12 – ÜK/1300/200) driven from above, trough made of metal sheet with special surface and PTFE coated against stick.

usability:

- small height of fall to take care of the biscuits

- layer height adjustable

- big spread width

place of installation: Netherlands