AViTEQ VIBRATION TECHNOLOGY

Particularly clean distribution

If you need to spread sensitive bulk materials cleanly over a defined area, AViTEQ vibration technology comes into play. With our low-maintenance and easy-to-clean vibratory spreaders, you can achieve a precise and fine spreading effect.

AViTEQ VIBRATION TECHNOLOGY

AViTEQ Vibration technology for accurate spreading

If belts, rollers or surfaces need to be evenly fed or sprinkled with free-flowing materials, AViTEQ vibratory spreaders are the solution. They are installed directly under the hopper and vibrated lengthwise by a magnetic vibrator. Depending on the application, the bulk material runs over a ground vibrating spreading plate or over a vibrating spreading roof, i.e. two ground plates at an angle to each other. At the discharge edge, the material finally falls from the lowest possible drop height as a uniform veil onto the surface to be sprinkled.

Stepless regulation

Depending on the spreading material and settings, the spreading capacity of our devices ranges from one to one thousand liters per meter of spreading width and hour, depending on the size of the device, the gap, the oscillation width and the willingness of the spreading material to be conveyed. The drive via a magnetic vibrator allows you to continuously regulate the flow rate at any time by simply changing the gap width and oscillation amplitude. Our easy-to-clean AViTEQ vibrating spreaders are mainly used in the recycling and chemical industries as well as in food-approved, hygienic versions in the food industry.
AViTEQ strewing cover strewing plate
CONVEYOR TECHNOLOGY

Strewing plate

More
AViTEQ compact feeder
CONVEYOR TECHNOLOGY

Compact / Linear feeder

More
AViTEQ vibrating feeder
CONVEYOR TECHNOLOGY

Vibrating feeder

More

AViTEQ VIBRATION TECHNOLOGY

Our references

AViTEQ rarely supplies "off-the-shelf" products. Rather, one of our strengths is the individual adaptation of our products to the most diverse requirements and specifications. Highly specialized engineers from development, design and engineering work closely together. Our national and international customers appreciate this.

AViTEQ REFERENCES

Belt weigh feeder with vibrating trough conveyor for DRI

AViTEQ hopper discharge units
AViTEQ REFERENCES

Bunker extraction of limestone

AViTEQ REFERENCES

Spiral conveyor for cooling crunchy muesli

AViTEQ Reference vibrating table
AViTEQ REFERENCES

Compacting activated carbon powder

AViTEQ reference linear vibration screen
AViTEQ REFERENCES

Vibrating screen for stone

Reference conveyor tube
AViTEQ REFERENCES

Feeding a granulate storage silo

AViTEQ_reference_parts_forwarder
AViTEQ REFERENCES

Protective screening of cement

AViTEQ Small conveyors
AViTEQ REFERENCES

Protective screening of animal feed additives

AViTEQ reference circular motion screen
AViTEQ REFERENCES

Circular motion screen for potato scraps

AViTEQ Reference reversible channel
AViTEQ REFERENCES

Reversing chute for hot foundry sand

AViTEQ Conveyor channel
AViTEQ REFERENCES

Conveying and protective screening of animal feed

AViTEQ REFERENCES

Separation screening for drilling fluid

AViTEQ dosing feeder
AViTEQ REFERENCES

Weighing raw meal, cement and slag

All references
WE ARE THERE FOR YOU PERSONALLY

Simply get in touch with us

As a specialist for individual solutions, we know that nothing can replace direct contact. We are therefore happy to answer your questions, projects and concerns personally. Simply use our contact form - we will get in touch with you as soon as possible.

Country(required)
DD point MM point YYYY
Accepted file types: pdf, jpg, jpeg, png, Max. File size: 7 MB.
This field is used for validation and should not be changed.