Header with Vitronic control unit
AViTEQ PRODUCTS

VIBTRONIC® control technology

The AViTEQ VIBTRONIC® devices are fully equipped control units for operating vibrators. With a wide range of standard functions and special versions, the controllers can be used in a wide variety of areas and adapted to the working environment.

SA(E), SC(E) AND SD(E) CONTROLLERS

VIBTRONIC®-S control units

Are designed as AC voltage regulators for controlling magnetic vibrators and operate according to the voltage control principle (phase angle control).

For all standardized voltages of the 50 and 60 Hz mains, AViTEQ has the right control unit in built-in and housing versions. The controls have voltage compensation for mains fluctuations and, depending on the version, a limiting control that protects the magnetic vibrator from so-called stop operation.

The setpoint can be set either via a potentiometer or an external reference variable (0-10 VDC or 0/4-20 mA). Information about the operating status can be read via an integrated status relay and LEDs. Depending on the version, a vibrator current of up to 100 A is possible. The control units can be extended with additional components and used for multiple drives or reversing operation of a vibratory feeder.

BRAKE UNIT, BRAKE BLOCK AND THROTTLE

VIBTRONIC®-U braking devices

AViTEQ Brake block

Used to operate unbalance motors, in particular to brake the unbalance motors after the drives have been switched off.

AViTEQ offers the right braking device for every application. Whether regulated or unregulated, with or without PTC thermistor monitoring and as a built-in or housing version. Depending on the application or problem, we offer a suitable solution. VIBTRONIC®-U braking devices can also be designed with transverse vibration monitoring as a special version.

SPEED CONTROL AND FREQUENCY INVERTER

VIBTRONIC®-U speed controls

Used for infinitely variable speed adjustment of the drives (unbalance motors and exciters) of vibratory conveyors.

This enables capacity control between 30 and 100% of the nominal conveying capacity. It can also be used for special tasks, e.g. compacting bulk materials or loosening impurities.

VIBTRONIC®-U speed control units are specially designed to meet the requirements of AViTEQ unbalance motors and are characterized by their insensitivity to high starting currents.

Man works on technical devices
SPARE PARTS AND ACCESSORIES

We complement optimally

We offer an extensive range of accessories and spare parts for our vibration control systems and components.

AViTEQ VIBRATION TECHNOLOGY

Our references

AViTEQ rarely supplies "off-the-shelf" products. Rather, one of our strengths is the individual adaptation of our products to the most diverse requirements and specifications. Highly specialized engineers from development, design and engineering work closely together. Our national and international customers appreciate this.

AViTEQ REFERENCES

Belt weigh feeder with vibrating trough conveyor for DRI

AViTEQ hopper discharge units
AViTEQ REFERENCES

Bunker extraction of limestone

AViTEQ REFERENCES

Spiral conveyor for cooling crunchy muesli

AViTEQ Reference vibrating table
AViTEQ REFERENCES

Compacting activated carbon powder

AViTEQ reference linear vibration screen
AViTEQ REFERENCES

Vibrating screen for stone

Reference conveyor tube
AViTEQ REFERENCES

Feeding a granulate storage silo

AViTEQ_reference_parts_forwarder
AViTEQ REFERENCES

Protective screening of cement

AViTEQ Small conveyors
AViTEQ REFERENCES

Protective screening of animal feed additives

AViTEQ reference circular motion screen
AViTEQ REFERENCES

Circular motion screen for potato scraps

AViTEQ Reference reversible channel
AViTEQ REFERENCES

Reversing chute for hot foundry sand

AViTEQ Conveyor channel
AViTEQ REFERENCES

Conveying and protective screening of animal feed

AViTEQ REFERENCES

Separation screening for drilling fluid

AViTEQ dosing feeder
AViTEQ REFERENCES

Weighing raw meal, cement and slag

All references

OUR PROCESSES

We offer support in all areas

With a wide range of product solutions, AViTEQ ensures that bulk materials can be safely processed within production processes in almost all industries. This starts with transportation and extends to screening, thermal treatment and weighing. We have systems available for a wide range of processes - from "C" as in "cooling" to "W" as in "weighing".

ISSUE

Efficient discharge of bulk material

Feed icon
FITTING

Consistently reliable feeding

Dose icon
DOSING

Consistently precise dosing

DEWATERING

Remove water effectively

Graphic Horizontal support
PROMOTE HORIZONTALLY

Reliable horizontal conveying

Graphic classification
CLASSIFICATION

Reliable classification

COOLING, HEATING, DRYING

Gentle product handling

SOLVE (DISCHARGE AIDS)

Reliably loosen bulk solids

Control screening icon
PROTECTION AND CONTROL SCREENING

Protective and control screening

CURRENT

Particularly clean distribution

Summarize graphic
COMPOUND

Gentle product compaction

CONVEY VERTICALLY

Vertical conveying with a system

OVERVIEW OF ALL PROCESSES
WE ARE HERE FOR YOU

Your expert

Hidden
How would you like to be contacted?
Country(required)
This field is used for validation and should not be changed.